To Coat Toilet / Urinal Interior

Clean the toilet/urinal as you normally would, taking care to remove residues. If mineral deposits are present, also remove these with a hard water cleaner.

1

Wipe the bowl inner surface dry or allow to air dry.

2

Shake sanipel Ceramic Coating well before use.

3

Spray sanipel Ceramic Coating onto surface. Coating can be sprayed directly onto the bowl interior. To coat bowl exterior, spray coating onto a cloth, then wipe onto the surface.

Avoid spraying on floor as coating will cause a slippery surface.

4

Wait 15 minutes before resuming toilet use.

5

Reapply Monthly.

To Coat Toilet/Urinal Exterior, Sinks, Tile, or other ceramic surfaces

Clean the surface as you normally would, taking care to remove residues. If mineral deposits are present, also remove these with a hard water remover.

1

Dry surface with a cloth or paper towel.

2

Shake sanipel Ceramic Coating well before use.

3

Spray sanipel Ceramic Coating onto cloth first then wipe onto surface.

Avoid spraying on floor as coating will cause a slippery surface.

4

Wipe with a cloth to spread evenly.

5

Wait 5 minutes before using as usual.

6

Reapply Monthly.